Machining & Grinding fluids

ROTHCUT-5100-SP is a high oil content stable water soluble metalworking fluid. it gives milky to semi translucent emulsion depending upon hardness of the water. It has got a good bio-stability which makes it low on odour and it gives excellent rust protection to machines and components.
ROTHCUT-5100-SP contains extreme pressure additives to give you excellently smooth cutting performance.

Advantages

FREE FROM ADDED TRIAZINE BIOCIDES, NONYL PHENOL & NP ETHOXYLATES, SULPHUR EP, PHOSPHORUS EP.
MULTI METAL COMPATIBLITY - FERROUS & NON FERROUS ALLOYS INCLUDINGHIGHT TENSILE STEELS, SOFT ALUMINIUM ALLOYS & YELLOW METAL ALLOYS.
IT EASILY FORMS A STABLE MILKY EMULSION IN DIFFERENT TYPES OF WATER WITH HARDNESS RANGING FROM 50 PPM TO 500 PPM.

Typical Physical Properties

1. APPEARANCE: AMBER TO LIGHT BROWN FLUID
2. SPECIFIC GRAVITY: 0.99 TO 1.0
3. MINERAL OIL CONTENT: 51%
4. PH OF 5% EMULSION: 9.0 TO 9.5
5. REFRACTOMETER FACTOR: 1.0

Product Mixing

PTCPL advise the use of automated mixing systems. Mixing manually, always add the Concentrate to the water with maximum agitation, if water is added to the concentrate, the Emulsions may prove unstable. Avoid mixing with very cold concentrate or water. Check Emulsion strength using a calibrated refractometer. Details of where to purchase equipment And how to use it are available from the PTCPL Technical Department.

Product Management

The working concentration should be carefully controlled and monitored on a daily basis as higher and lower working concentrations have health and safety implications. Machines should be cleaned out regularly. Fluid and particulate contaminants should be kept to a Minimum. This is important especially in terms of bacterial control and is in line with the latest advice from government and professional sources. Detailed reference sources are given in the msds.